The Taylor Made Tuff End Round Boat Fender for Commercial Boats part # 36961152 we do not offer a replacement valve for. If you need this as yours is lost or damaged, your best option is to reach out to the manufacturer directly. The only option we'd have is a new unit. I have attached a full selection of our inflatable bumpers for you below as well. view full answer...
The Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector - Vehicle End # HM40920 will fit the location and give you the functions you are seeking. It will work well for your 2012 Chevy Silverado LT. view full answer...
There has been quite a bit of debating back and forth over whether or not a hitch like the # 13184 can be installed on your 2006 Toyota Tundra. The manufacturers have also had mixed answers on the fit over time. One thing is for certain, installation would require modification of the bumper and also the removal of the factory hitch. Even then, there is no guarantee you will be able to fit a custom hitch on your vehicle.
The best option would be to use a universal hitch like the Draw-Tite... view full answer...
The padded covers we have for the 40" Post-Style Guide-Ons # CE27626 you purchased can be found as part # CE27902 for 36" tall pads.
If you want to upgrade to 60" tall guide-ons you can do so with part # CE11354 which comes in a quantity of 1 so you'll need 2 for your setup. For these you need the 48" tall pads # CE27903 for 48" instead. view full answer...
It is not recommended that a trailer hitch be used again if the part of the car that the hitch was installed on was involved in the accident in any way. There can be stress cracks in the welds that may not be visible, and that would compromise the stability and safety of the hitch.
If there is no damage to the hitch from the accident and you wish to install it on your 2005 Mercury Sable, you can go to our website and order a replacement hardware kit. I have attached a link to the page... view full answer...
We have just what you need for a trailer wiring harness replacement. But you may want to first check the trailer wiring fuses or relays. You should have a fuse legend on the inside fo the fuse panel. You should be able to find it in the owner's manual or check with your dealership for the trailer towing fuses or relays.
You said you have the Mopar wire harness on your 2002 Ram. If you did not have a 7-way harness I recommend part # C55504. You just need to locate the connection points... view full answer...